Nexo GEO S12 EN54 Series, System Manual

Page: 20 / 53

GEO S12 EN54 HARDWARE SETUP PROCEDURE
Page 20 / 53
System Manual GEOS12 EN54
7.2 General Description
7.2.1 GEO S1210 EN54 and GEO S1230 EN54
GEO S1210 EN54 GEO S1230 EN54
GEO S1210 EN54 and GEO S1230 EN54 incorporate two connecting plates (one per side) on which a comprehensive range
of accessories can be mounted.
GEO S12 EN54 connecting plates
Angle splay setting sequences are as follow:
- GEO S1210 EN54 to GEO S1210 EN54: 0.2° / 0.31° / 0.5° / 0.8° / 1.25° / 2° / 3.15° / 5° / 6.25° / 8° / 10°
- GEO S1210 EN54 to GEO S1230 EN54: 16°
- GEO S1230 EN54 to GEO S1230 EN54: 16° / 22.5° / 30°
7.2.2 GEO S12 EN54
“Left” and “Right” configuration
GEO S12 EN54
can be installed “Left” or “Right”:
-
“Left” means HF waveguide is left as seen from front
-
“Right” means HF waveguide is right as seen from front
GEO S12 EN54
can be connected to bumpers “Left” or “Right” by simply flipping the cabinets.
Whenever possible, NEXO recommends symmetrical designs (preferably HF waveguide inwards in stereo
configurations)
GEO S12 EN54
“Left”
GEO S12 EN54
“Right”
Oblong holes for Touring Applications Accessories
Tapped holes for Fixed Installation Accessories