Nexo FXO-128o, User Manual

Page: 62 / 90

4 Configurations on Web Interface
Description
Calls from
Caller Prefix
Callee Prefix
Description of the IP  Tel routing; it is used to identify the IP 
Tel routing.
Choose calls from IP trunk or SIP server; ‘any’ means any IP addresses.
The prefix of the caller number, which helps match routing exactly. Its
length is less than or equal to the caller number. For example, if caller
number is 2001, the caller prefix can be 200 or 2. ‘Any’ means the
prefix matches any caller number.
The prefix of the called number, which helps match routing exactly. Its
length is less than or equal to the called number. If the called number is
008675526456659, the called prefix can be 0086755 or 00.,“any”
means the prefix matches any called number
Calls to Which port or port group to which calls are routed.
4.11.5
Tel

IP/Tel Routing
Calls from the FXO port or port group can be routed to IP trunk or ports of SIP server/other
device through Tel
 IP/Tel routing.
Figure 4-11-5 Add Tel  IP/Tel Route
Table 4.11.5 Explanation of Tel  IP/Tel Route
Parameter Explanation
The index of this Tel  IP/Tel routing; range is from 0 to 127. Each
Index index cannot be used repeatedly. Routing priority: 0 is the highest
priority.
Gateway-128o User Manual 60