background image

OSD menu functions

OSD Screen 

Press MENU key, OSD screen appears as below.

Press UP/DOWN Key, you can move between the six primary functions.

Press Select key at Picture group to highlight this sub menu. You can now navigate  the

sub menu using the UP/DOWN keys. To make an adjustment to an item, use the

UP/DOWN buttons to make your adjustments. 

At anytime, press the Menu button three times to exit and save your settings. 

Display mode 

To change the display mode, press select key each time

Analog

Digital

Video

S-Video

Select key

Select key

Select key

Adjusting the displays

The microprocessor in the display has the capability to adjust itself to the computer to 
which it is attached. This auto adjustment will take place when the unit is first installed and 
connected to a computer and there after. If the video input change, or is user imitated. If 
the picture is not satisfactory, the first step is to allow the unit to attempt to re-adjust itself 
to your computer.

Located on the rear of unit are OSD keypads used for adjusting the display. Please see 
the figures below :

MENU

SLECT

DOWN

UP

5

Summary of Contents for NIO150SA














Reviews: