NEXIO NEX104MFG, User Manual

Page: 4 / 18

Package Contents
Your LCD monitor package will consist of the primary components listed below.
Open shipping container and lay all components on a flat clean surface
☞
LCD Monitor
☞
DC Power adapter : Connects to DC In port on the base of monitor
☞
Power cord : Connects wall outlet to DC Power adapter
☞
D-SUB 15pin VGA cable : Connects PC to LCD monitor
☞
RS232 or USB Touch Interface cable( touch screen option units only)
☞
Manual and Touch Driver CD-ROM( touch screen units only)
☞
Brackets for mounting ( Option)
Connecting to PC
To attach your TFT-LCD monitor to your system, follow the instructions hereunder
1. Connect 15-pin D-SUB cable to the connector or display card of your computer system.
Tighten all the screws
2. Connect 15-pin D-SUB cable to the appropriate connectors on the back of the monitor
head
3. Connect AC adapter cable to the power input connectors on the back of the monitor head
4. Connect one end of the power cord to the AC adapter and the other end to the power
outlet
5. If the unit has a touch screen, connect the touch screen interface cable to the computer.
6. Turn on the monitor
7. To complete the setup
A. set up your computer system to :
640 x 480 resolution @ 60Hz.( NEX104 MF(R)G)
800 x 600 resolution @ 60Hz.( NEX121 MF(R)G)
1024 x 768 resolution @ 60Hz.( NEX150 MF(R)G)
1280 x 1024 resolution @ 60Hz.( NEX170/190/ MF(R)G)
B. Use the following OSD controls
- Auto Adjust
- Auto Color
‰
Adjustment of the H/V Position and Image Adjust H. Size controls may be required to
complete setup of your TFT- LCD monitor. For a full description of these OSD controls,
refer to OSD menu functions