3.3 Multipoint Touch
3.3.1 Enable mouse action
As a Basic option, touch action can be recognized on all windows programs. By disabling this option,
the touch is no longer recognized on all windows program. You can also use the Popup Control
Menu (Refer to the page 53) to enable the function again.
3.3.2 Enable gesture action
This option makes Gesture Function available. It is operated at Drawing Mode only. Please refer to
the
3.2.5 Touch Action
for setting Drawing Mode. Please refer to the
Appendix 2 Basic Gestures
on Windows 7
for Gesture Action.
3.3.3 Enable multi-touch limit
The size of a touch object can be adjusted in connection with
3.3.3.1 X-width limit.
Allow XY range
Recognized within the size of X Y limit
Limit XY range
Recognized without the size of X Y limit
3.3.3.1 X - width limit
iNexio Touch Driver has the area recognition function on Single &Multi point touch. With X-Width
Limit/Y-Width Limit function, the size of a touch object can be adjusted on X Y limit in
connection with
3.3.3.1 X-width limit.
(Refer to the
3.4.3.3 Multitouch view
)
3.3.4 Multipoint Reset
XY range setting on Multipoint Touch can be initialized
29
