6
ASSEMBLY INSTRUCTIONS
1.Locate the gas regulator (1-1). Grasp the regulator (1-1) with
the knob (1-2) facing directly up. Line up the collar on the
regulator (1-1) with the open end of the burner tube (1-3) as
shown in fig. 1.
2. Screw the regulator (2-1) into the open end of burner (2-2)
as shown in fig. 2.
3. Once the regulator is in as far as it will go, tighten with
a wrench. Turn the regulator so that the knob is facing
forward.
4. Note: Always make sure the regulator is secured in
the fully lock-in position before attaching propane
cylinder.
5. (3-2)Be sure the gas control knob (3-1) is in the “OFF”
position. Check to make sure threaded areas on
cylinder and regulator are clean. Screw the propane
cylinder (3-2) onto the regulator (3-3) making sure to
engage threads correctly to achieve proper connection.
To remove the propane cylinder (3-2) unthread the
cylinder from the regulator (3-3) as shown in fig.3.
Fig. 1
(1-3)
(1-1)
(1-2)
Fig. 2
(2-2)
(2-1)
Fig. 3
(3-2)
(3-3)
(3-1)
