manualshive.com logo in svg

Nexcom NSA 3150, User Manual

The Nexcom NSA 3150 is a cutting-edge device designed to enhance your network security. With its advanced features and intuitive interface, this product ensures optimum performance. Easily set up and configure the NSA 3150 with our comprehensive User Manual, available for free download at manualshive.com, providing step-by-step instructions for hassle-free installation and operation.

Share
Download
background image

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.

42

NSA 3150 User Manual 

Chapter 4: BIOS Setup

ACPI Settings

This section is used to configure ACPI settings.

Advanced

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enables or Disables BIOS ACPI 

Auto Configuration.

ACPI Settings

Enable ACPI Auto Conf

Lock Legacy Resources

[Disabled]

[Disabled]

Enable ACPI Auto Conf

Enables or disables BIOS ACPI auto configuration.

Lock Legacy Resources

Enables or disables lock of legacy resources

Summary of Contents for NSA 3150








































































Reviews:

No comments

Related manuals for NSA 3150

Panasonic KX-UDS124 Important Information Manual preview
KX-UDS124
Brand: Panasonic Pages: 44
Paradox ZX32D Manual preview
ZX32D
Brand: Paradox Pages: 4
QNO 2WAN 3LAN User Manual preview
2WAN 3LAN
Brand: QNO Pages: 106
Face XR18 User Manual preview
XR18
Brand: Face Pages: 8
NETGEAR RAXE500 User Manual preview
RAXE500
Brand: NETGEAR Pages: 169
Rolls HR11C Owner'S Manual preview
HR11C
Brand: Rolls Pages: 2
NETGEAR RP614 v2 Installation Manual preview
RP614 v2
Brand: NETGEAR Pages: 2
Intel F-Tile SDI II Intel Agilex User Manual preview
F-Tile SDI II Intel Agilex
Brand: Intel Pages: 39
janitza Procont LMC-008-IO User Manual And Technical Data preview
Procont LMC-008-IO
Brand: janitza Pages: 28
DigiTech RPX400 Troubleshooting Manual preview
RPX400
Brand: DigiTech Pages: 6
Maipu SM3100-28TC-AC Install Manual preview
SM3100-28TC-AC
Brand: Maipu Pages: 19
Hawking H-CF30W Quick Installation Manual preview
H-CF30W
Brand: Hawking Pages: 21
ORiNG TGXPS-1080-M12-MV Series Quick Installation Manual preview
TGXPS-1080-M12-MV Series
Brand: ORiNG Pages: 2
H3C SecPath F1070 Manual preview
SecPath F1070
Brand: H3C Pages: 68
PairGain HiGain Line Unit HLU-388 Quick Installation Manual preview
HiGain Line Unit HLU-388
Brand: PairGain Pages: 7
Ubiquiti EdgePoint EP-R8 Quick Start Manual preview
EdgePoint EP-R8
Brand: Ubiquiti Pages: 22
Allynk Technology CAG-0100 User Manual preview
CAG-0100
Brand: Allynk Technology Pages: 39
B&B Electronics Elinx EIRP410-2SFP-T Manual preview
Elinx EIRP410-2SFP-T
Brand: B&B Electronics Pages: 24

Brands by name

Popular brands

Load more brands