Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
41
NSA 3150 User Manual
Chapter 4: BIOS Setup
PCI Subsystem Settings
This section is used to configure the PCI.
Advanced
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Value to be programmed into
PCI Latency Timer Register.
PCI Bus Driver Versio
PCI Common Settings
PCI Latency Timer
VGA Palette Snoop
PERR# Generation
SERR# Generation
PCI Express Settings
V 2.05.02
[32 PCI Bus Clocks]
[Disabled]
[Disabled]
[Disabled]
PCI Latency Timer
This feature is used to select the length of time each PCI device will control
the bus before another takes over. The larger the value, the longer the PCI
device can retain control of the bus. Since each access to the bus comes
with an initial delay before any transaction can be made, low values for the
PCI Latency Timer will reduce the effectiveness of the PCI bandwidth while
higher values will improve it.
VGA Palette Snoop
Enables or disables the VGA palette registers snooping.
PERR# Generation
Enables or disables the PCI device to generate PERR#.
SERR# Generation
Enables or disables the PCI device to generate SERR#.
►
