Nexcom NISE 3500M Series User Manual Download Page 68

Page: 68 / 120

NISE 3500, NISE 3500M User Manual

Intel IGD SWSCI OpRegion

This section is used to configure the Intel graphics display.

Select DVMT/FIXED

Mode Memory size used

by Internal Graphics

Device

BIOS SETUP UTILITY

Intel IGD SWSCI OpRegion Configuration

DVMT/FIXED Memory

IGD - Boot Type

LCD Panel Type

Advanced

[256MB]

[CRT + DVI]

[VBIOS Default]

→ ←:

Select Screen

↑↓:

Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save ESC: Exit

DVMT/FIXED Memory

Selects the DVMT/FIXED mode memory size used by the internal graphics
device.

IGD - Boot Type

Selects the video device that will be activated during POST. This will not
affect any external graphics that may be present.

LCD Panel Type

Selects the LCD panel used by the internal graphics device.

Intel TXT(LT) Configuration

This section is used to configure the Intel Trusted Execution technology.

BIOS SETUP UTILITY

Intel Trusted Execution Technology Configuration

Intel TXT(LT) Support

Advanced

[Disabled]

→ ←:

Select Screen

↑↓:

Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save ESC: Exit

Intel TXT(LT) Support

The options are Enabled and Disabled.

Summary of Contents for NISE 3500M Series






















































































































Search results

Summary of Contents for NISE 3500M Series

Reviews:

Related manuals for NISE 3500M Series

Brands by name

Popular brands

Nexcom NISE 3500M Series, User Manual

Search results

Summary of Contents for NISE 3500M Series

Reviews:

Related manuals for NISE 3500M Series

Brands by name

Popular brands