background image

Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.

ii

NEX 614B User Manual 

Content

C

ontents

Preface

Copyright  ............................................................................................. iv
Disclaimer .............................................................................................. iv
Acknowledgements ............................................................................... iv
Regulatory Compliance Statements ........................................................ iv
Declaration of Conformity ...................................................................... iv
RoHS Compliance ................................................................................... v
Warranty and RMA ................................................................................ vi
Safety Information ................................................................................viii
Installation Recommendations ...............................................................viii
Safety Precautions .................................................................................. ix
Technical Support and Assistance ............................................................ x
Conventions Used in this Manual ............................................................ x
Global Service Contact Information ........................................................ xi
Package Contents .................................................................................xiii
Ordering Information ............................................................................xiv

Chapter 1: Product Introduction

Overview ................................................................................................1
Key Features ...........................................................................................1
Hardware Specifications ..........................................................................2
Knowing Your NEX 614B ........................................................................4

Edge I/O View......................................................................................5

Chapter 2: Jumpers and Connectors

Before You Begin ....................................................................................6
Precautions  ............................................................................................6
Jumper Settings ......................................................................................7
Locations of the Jumpers and Connectors ...............................................8
Jumpers ..................................................................................................9

Clear RTC RAM ...................................................................................9
COM1 Ring/+5V/+12V Selection ..........................................................9
LVDS Panel Voltage Select ..................................................................10
Inverter Voltage Select .......................................................................10
Inverter Backlight Control Mode Select ..............................................11
Chassis Intrusion Jumper ...................................................................11

Connector Pin Definitions .....................................................................12

Internal Connectors ...........................................................................12

SATA Power Connector ..................................................................12
Audio Amplifier Connector ............................................................12
Chassis Fan Connector ...................................................................13
CPU Fan Connector ........................................................................13
LVDS Connector .............................................................................14
Embedded DisplayPort ...................................................................14
Digital I/O Connector .....................................................................15
System Panel Connector .................................................................15
Serial ATA 6.0Gb/s Connector 1 .....................................................16
Serial ATA 6.0Gb/s Connector 2 .....................................................16
Speaker Connector ........................................................................17

Summary of Contents for NEX 614B





















































Reviews: