Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.
36
NEX 614B User Manual
Chapter 3: BIOS Setup
Max TOLUD
Configures the maximum value of TOLUD.
Max Link Speed
Configures the maximum link speed of the PEG device.
System Agent (SA) Configuration
Graphics Configuration
Chipset
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Maximum Value of TOLUD.
Dynamic assignment would
adjust TOLUD automatically
based on largest MMIO length of
installed graphic controller
System Agent Bridge Name
Memory Configuration
Memory Frequency
Total Memory
DIMM#0
DIMM#1
Max TOLUD
Max Link Speed
Graphics Configuration
Skylake
2133 MHz
16384 MB
16384 MB
Not Present
[Dynamic]
[Auto]
Chipset
Version 2.17.1255. Copyright (C) 2017 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select which of IGFX/PEG/PCI
Graphics device should be
Primary Display Or select SG
for Switchable Gfx.
Graphics Configuration
Primary Display
Primary IGFX Boot Display
LVDS
LVDS Panel Type
Skylake
[Auto]
[VBIOS Default]
[Enabled]
[1024x768,18bit,60Hz]
Primary Display
Select which IGFX/PEG/PCI graphics device should be the primary display or
select SG for Switchable Gfx.
Primary IGFX Boot Display
Select the video device which will be activated during POST. Has no effect
if external graphics is present. Secondary boot display selection will appear
based on your selection. VGA modes will be supported only on primary display.
LVDS
Enables or disables LVDS.
LVDS Panel Type
Configures the LVDS panel resolution.