Nexcom NEX 614 User Manual Download Page 61

Page: 61 / 74

NEX 614 User Manual

Chapter 3: BIOS Setup

Allow PERST# GPIO Usage

Enables or disables GPIO-based resets to PEG endpoint(s) during margin
search.

SW EQ Enable VOC

Configures the SW EQ Enable VOC mode.

Generate BDAT PEG Margin Data

Enables or disables the generation of BDAT PEG margin tables.

PCIe Rx CEM Test Mode

Enables or disables PCIe Rx CEM Test mode.

PCIe Spread Spectrum Clocking

Enables or disables PCIe Spread Spectrum Clocking for compliance testing.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Gen3 Root Port Preset value for each Lane

Lane 0

Lane 1

Lane 2

Lane 3

Lane 4

Lane 5

Lane 6

Lane 7

Lane 8

Lane 9

Lane 10

Lane 11

Lane 12

Lane 13

Lane 14

Lane 15

Gen3 Root Port Preset Value for Each Lane

Displays the root port preset value for lane 0 to lane 15.

Chipset

Summary of Contents for NEX 614











































































Search results

Summary of Contents for NEX 614

Reviews:

Related manuals for NEX 614

Brands by name

Popular brands

Nexcom NEX 614, User Manual

Search results

Summary of Contents for NEX 614

Reviews:

Related manuals for NEX 614

Brands by name

Popular brands