Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
33
NEX 614 User Manual
Chapter 3: BIOS Setup
Serial Port 2 Configuration
This section is used to configure serial port 2.
Serial Port
Enables or disables the serial port.
Serial Port Mode
Configures the serial port mode to RS232, RS422, RS485 or RS485 Auto.
Terminal 120 Ohm
Enables or disables serial port terminal resistance.
Advanced
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM)
Serial Port 2 Configuration
Serial Port
Device Settings
Serial Port Mode
Terminal 120 Ohm
[Enabled]
IO=2F8h; IRQ=3;
[RS232]
[Disabled]
Serial Port 3 Configuration
This section is used to configure serial port 3.
Serial Port
Enables or disables the serial port.
Advanced
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2016 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM)
Serial Port 3 Configuration
Serial Port
Device Settings
[Enabled]
IO=3E8h; IRQ=6;
