Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
42
NDiS B338 User Manual
Chapter 4: BIOS Setup
CPU Fan Setting
This section is used to configure the CPU fan options.
Exit
Advanced
Chipset
PCIPnP
Security
Main
Version 2.22.1282. Copyright (C) 2022 AMI
Aptio Setup - AMI
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Fan control mode select
CPU Fan Setting
CPU Fan Mode
Manual PWM
[Manual mode]
128
CPU Fan Mode
Configures the fan mode of the CPU fan. The options are Manual mode and
Smart FAN (automatic fan mode).
Manual PWM Setting
Configures the fan speed manually when the fan mode is set to Manual
mode. The value ranges from 0 to 255 for 0 to 100%.
S5 RTC Wake Settings
This section is used to configure S5 RTC Wake Settings.
Exit
Advanced
Chipset
PCIPnP
Security
Main
Version 2.22.1282. Copyright (C) 2022 AMI
Aptio Setup - AMI
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable system wake
on alarm event. Select
FixedTime, system will wake on
the hr::min::sec specified.
Select DynamicTime, System
will wake on the current time
+ Increase minutes
Wake system from S5
Wake up minute increase
[Dynamic Time]
1
Wake system from S5
Disabled
Disables the system wake from S5.
Fixed Time
Sets the system wake-up time in hours, minutes, or seconds.
Dynamic Time System will wake on the current time + increase minute(s)