background image

Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.

3

NDiS B338 User Manual 

Chapter 1: Product Introduction

Hardware Specifications

CPU Support

 

Intel

®

 Celeron

®

 J6412 processor, 10W

Graphics

 

Intel

®

 UHD graphics

Main Memory

 

2 x 260-pin SO-DIMM sockets, supports DDR4 3200MT/s MHz, Non ECC, 
un-buffered memory up to 32G (single socket max. 16GB)

I/O Interface-Front

 

Power button with LED

 

4 x COM port

     - COM1: RS232/422/485
     - COM2~COM4: RS232

 

4 x Antenna holes

I/O Interface-Rear

 

3 x HDMI 2.0

 

2 x RJ45 Gigabit LAN with LEDs

 

1 x USB 3.2 Gen 1

 

5 x USB 2.0

 

1 x Mic in

 

1 x Line out

 

12V~24V DC input

Internal I/O 

 

8 x GPIO (4 x GPI, 4 x GPO)

 

TPM 2.0 onboard

 

1 x USB 2.0 pin header

 

1 x Speaker-out pin header with 2.5W/8

Ω

 amplifier

Storage

 

1 x M.2 2280 Key M (PCIe Gen3 x4) for optional storage modules

Expansion

 

1 x M.2 3042/3052 Key B (USB 3.2, USB 2.0) for optional LTE or 5G 
modules

 

1 x mini-PCIe slot (USB 2.0, PCIe x1, SATA) for optional Wi-Fi and LTE

 

1 x SIM slot

Power Supply

 

1 x External 60W AC/DC power adapter

 

Input: 100VAC to 240VAC

 

Output: DC+12VDC

Environment

 

Operating temperature: -20°C to 60°C

 

Storage temperature: -20°C to 80°C

 

Humidity: 95% (non-condensing)

Dimensions

 

224mm (W) x 150mm (D) x 38.8mm (H) (with wall mount bracket)

Certification

 

CE (E EN55032)

 

FCC Class A (EMI Part 15B)

 

LVD (EN62368-1)

Operating System

 

Win10 64-bit

Summary of Contents for NDiS B338






























































Reviews: