Nexcom NCr-301-VHR User Manual Download Page 47

Page: 47 / 48

NCr-301-VHR User Manual

Chapter 2: Camera Configuration

Maintenance

This section is used to restart the IP camera, or restore it to factory default
settings.

Maintain

Restart

Click this button to reboot the camera.

Reset to Default

Click this button to restore all the camera’s setting back to factory default.

Camera Name Settings

Camera Name

Specify a name for the camera. The name will be displayed in the upper left
corner on the live video stream of the camera. To enable this, make sure the
option

Display Camera Name

in the

Overlay Settings

menu is checked.

For information on the

Overlay Settings

menu, please refer to page 20.

Save

Save button to apply the configurations, click on this button once all the
settings are confirmed for the new changes to take effect.

Reset

Reset button to discard all the settings applied.

Summary of Contents for NCr-301-VHR

















































Search results

Summary of Contents for NCr-301-VHR

Reviews:

Related manuals for NCr-301-VHR

Brands by name

Popular brands

Nexcom NCr-301-VHR, User Manual

Search results

Summary of Contents for NCr-301-VHR

Reviews:

Related manuals for NCr-301-VHR

Brands by name

Popular brands