Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
43
MRC 2100 User Manual
Appendix A: Installing Device Drivers
a
ppendix
a: i
nstallinG
d
eviCe
d
rivers
Note: The MRC2100 already preload all the drivers in the Oper-
ating System. In the event that you have performed a clean in-
stall of Operating System, and need to install the device drivers,
please follow the exact installing sequence to ensure the devices
to be properly installed.
Note: Owing to issues pending in IntelR development, please
only copy drivers from the CD-ROM to HDD then install from
here. Do not install drivers directly from the CD-ROM. NEXCOM
is continuously working with IntelR and will update drivers
when solutions are delivered
All drivers and APs are saved in CD Driver including the latest
function key. In the event that you have reformatted the HDD,
be sure to copy all drivers and APs to a local HDD (The Chipset
USB_Client driver must be installed from a local HDD).
Device Driver Installation Sequence
We recommend you to create a driver folder for called “MRC2100” to the
local HDD, (example, D:\MRC2100), and copy the drivers to this location.
Most of the driver installations are fairly easy. We provide the instruction
for USB_TO_COM for your reference.
Be sure to follow the installing sequence as below:
1. Chipset INF
2. Chipset USB_Client (Must be installed from a local HDD)
3. VGA
4. Touch panel
5. USB_TO_COM (Refer to installing procedure below)
6. HD Audio
7. Finger-Print
8. WLAN
9. TPM
10. 3.5G_MC8775
11. Function Key