Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
17
Chapter 2: Operating Your Tablet PC
MRC 2100 User Manual
4. When the setup complete, press <Finish>.
5. Once the installation is completed, installation of GPS Information onto
PDA device will be launched automatically. Select <Yes> to continue.
Setup Window Screenshot
Double click GpsInfo_Vista icon from Desktop to start GPS.
Scan Com Port” - Scan all available communication port for GPS recep-
•
tion
“Cold Start” - Cold start the GPS receiver
•
“Power Save” - Check the box to enable/disable the Power Save Mode
•
(the option is available only when a GPS device is found)
“Tab Menu” - Switch between Setup and GPSINFO windows
•
“Com Port Selection” - Select the appropriate communication port
•
where GPS receiver is configured (it may be necessary to try several com-
munication ports until the right one is found)
“Baud Rate Selection” - Select the appropriate transferring rate
•
(Please
set the baud rate at 38400)
“Start GPS button” - Turn on/off the GPS device
•
“VTG check box” - Some navigation or map software requires to receive
•
VTG data output for during operation. Check the box to activate the
VTG data output.
Com Port Selection
Baud Rate Selection
Start GPS button
Cold Start
Scan Com Port
M a i n G P S d a t a
Window
VTG check box
WAAS/EGNOS
Power Save
Tab Menu
