Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
IWF 300 and IWF 310 User Manual
69
Chapter 2: System Configuration
2.4.7.1 General Settings
Clicking “General Settings” tab on the top of screen will
show the “Zone Settings” configuration including “General
Settings” and “Zones” categories.
In the “General Settings” category, there are 5 basic options
for traffic control over interfaces:
”Enable SYN-flood protection” (default: enabled), “Drop
invalid packets” (default: disabled), “Input” (default:
accept”), “Output” (default: accept), and “Forward”
(default: reject)
In the “Zones” category, create or edit zones over your
network interfaces to control network traffic flow.
There are 3 control buttons for “Zones” settings:
Edit:
Edit the followed flow entry.
Delete:
Delete the followed flow entry.
Add:
Create a new entry for traffic flow among zones over
interfaces.