![Nexcom EBC 572 Series User Manual Download Page 39](http://html.mh-extra.com/html/nexcom/ebc-572-series/ebc-572-series_user-manual_1681234039.webp)
38
Chapter 4
EBC572 User’s Manual
Refer to your drive’s documentation or look on the drive if you need to obtain this information. If no device
is installed, change the value to None.
Access Mode
This item defines some special way s that can be used t o access IDE hard disks such as LBA (Logical
Block Addressing). Leave t his value at Auto and the system will automatically decide the fastest way to
access the hard disk drive.
Press <
Esc
> to close the IDE device submenu and return to the Standard CMOS Features page.
Drive A
Select this field to the type of floppy disk drive installed in your s ystem. The choices are:
w
None
No floppy drive installed
w
360K, 5.25 in
5-1/4 inch PC type standard drive; 360 kilobyte capacity
w
1. 2M, 5.25 in
5-1/4 inch AT-type high-densit y drive; 1.2 megabyte capacity
w
720K, 3.5 in
3-1/2 inc h double-sided drive; 720 kilobyte capacity
w
1.44M, 3.5 in
3-1/2 inch double-sided drive; 1. 44 megabyte c apacity
w
2. 88M, 3.5 in
3-1/2 inch double-sided drive; 2. 88 megabyte c apacity
Note: The None option could be used for disk less work stations.
Video
Set this field to the type of graphics c ard ins talled in y our syst em. If you are using a BGA or higher
resolution card, choose the EGA/VGA option. The options are:
w
EGA/VGA
Enhanced Graphics Adapt er/Video Graphics Array. For EGA, VGA, S EGA or PGA
monitor adapt ers
w
CGA 40
Color Graphics Adapter, power up in 40 column mode
w
CGA 80
Color Graphics Adapter, power up in 80 column mode
w
MONO
Monochrome adapter, includes high resolution monochrome adapters
Halt On
During the Power-On Self-Tes t (P OST), the computer st ops if the BIOS detec t a hardware error. This
setting determines which type of error will cause the system to halt during boot. The options are:
w
All Error: Whenever the BIOS detects a non-fatal error, the system will be stopped and you will be
prompted.
w
No Errors: The system boot will not st op for any error that may be detected.
w
All, But Keyboard: The sys tem boot will not stop for a keyboard error, but it will stop for all others.
w
All, But Diskette: The system boot will not stop for a disk error, but it will stop for all others.
w
All, But Disk/Key: The system boot will not stop for a keyboard or disk error, but it will stop for all
others.
StockCheck.com
Summary of Contents for EBC 572 Series
