EBC 300 User’s Manual
13
Appendix B
2.3 Setting Jumpers
A jumper is the simplest kind of electric switch. It consists of two metal pins and a cap. When setting the
jumpers, ensure that the jumper caps are placed on the correct pins. When the jumper cap is placed on
both pins, the jumper is SHORT. If you remove the jumper cap, or place the jumper cap on just one pin,
the jumper is OPEN. Please see the following illustrations
The illustrations on the right show
a 2-pin jumper. When the jumper
cap is placed on both pins, the
jumper is
SHORT
. If you remove
the jumper cap, or place the
jumper cap on just one pin, the
jumper is
OPEN
.
Open (Off)
Short (On)
These illustrations show a 3-pin
jumper. Pins 1 and 2 are
SHORT
.
Table 2-1: Setting Jumpers
Summary of Contents for EBC 300 Series
Page 5: ...EBC 300 User s Manual 5 Chapter 1 Chapter 1 General Information ...
Page 10: ...EBC 300 User s Manual 10 Chapter 1 1 4 Board Layout Figure 1 2 Overview of EBC 300 ...
Page 11: ...EBC 300 User s Manual 11 Appendix B Chapter 2 Jumper Setting ...
Page 21: ...EBC 300 User s Manual 21 Appendix B Chapter 3 Expansion ...
