Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
48
Chapter 4: BIOS Setup
DNA 1120/1120A User Manual
Disabled
Compatible
Enhanced
BIOS SETUP UTILITY
← →
Select Screen
↑↓
Select Item
+-
Change Field
F1
General Help
F10 Save and Exit
ESC Exit
IDE Configuration
ATA/IDE Configuration
[Enhanced]
Configure SATA as
[IDE]
u
Primary IDE Master
: [Hitachi HTE72]
u
Primary IDE Slave
: [Not Detected]
u
Secondary IDE Master
: [2GB ATA Flash]
u
Secondary IDE Slave
: [Not Detected]
u
Third IDE Master
: [128M]
u
Third IDE Slave
: [Not Detected]
Hard Disk Write Protect
[Disabled]
IDE Detect Time Out (Sec)
[35]
Advanced
IDE Configuration
This section is used to configure the IDE drives.
ATA/IDE Configuration
This field is used to configure the IDE drives. The options are Disabled,
Compatible and Enhanced.
Configure SATA As
IDE
This option configures the Serial ATA drives as Parallel ATA physi-
cal storage device.
AHCI This option configures the Serial ATA drives to use AHCI (Ad-
vanced Host Controller Interface). AHCI allows the storage driver
to enable the advanced Serial ATA features which will increase
storage performance.
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Primary IDE Master to Third IDE Slave
When you enter the BIOS Setup Utility, the BIOS will auto detect the ex-
isting IDE devices then displays the status of the detected devices. To con-
figure an IDE drive, move the cursor to a field then press <Enter>.
Hard Disk Write Protect
Enables or disables write protection of the device. This is applicable only
when the device is accessible through the BIOS.
IDE Detect Time Out (Sec)
Selects the time out value for detecting ATA/ATAPI devices.
