Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
53
Chapter 4: BIOS Setup
DNA 1120/1120A User Manual
AHCI Port0 to AHCI Port2
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← →
Select Screen
↑↓
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
AHCI Port0
Device
:Not Detected
SATA Port0
S.M.A.R.T.
Advanced
[Auto]
[Enabled]
Select the type of
device connected to the
system.
SATA Port0
Selects the type of device connected to the system.
S.M.A.R.T.
The system board supports SMART (Self-Monitoring, Analysis and Re-
porting Technology) hard drives. SMART is a reliability prediction tech-
nology for ATA/IDE and SCSI drives. The drive will provide sufficient
notice to the system or user to backup data prior to the drive’s fail-
ure. The default is Disabled. If you are using hard drives that support
S.M.A.R.T., set this field to Enabled. SMART is supported in ATA/33 or
later hard drives. The options are Auto, Enabled and Disabled.
Select MPS Revision.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← →
Select Screen
↑↓
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
MPS Configuration
MPS Revision
[1.4]
Advanced
MPS Revision
Selects the MPS revision used by the system.
MPS Configuration
This section is used to configure the multi-processor table.