manualshive.com logo in svg

Nexcom DFA1163, User Manual

Share
Download
Nexcom DFA1163 User Manual Download Page 63

Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.

47

DFA1163 User Manual 

Chapter 4: BIOS Setup

USB HS Port 1 

Save & Exit

Advanced

IntelRCSetup

Security

Boot

Main

Version 2.19.1266. Copyright (C) 2021 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enable/Disable this USB Physical 
Connector (physical port). 
Once disabled, any USB devices 

plug into connector will not be 
detected by BIOS or OS.

USB HS Physical Connector 

[Enabled]

USB HS Physical Connector

Enables or disables the USB Physical Connector (physical port). Once 
disabled, any USB devices plugged into the connector will not be detected 
by BIOS or OS.

USB HS Port 2 

Save & Exit

Advanced

IntelRCSetup

Security

Boot

Main

Version 2.19.1266. Copyright (C) 2021 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enable/Disable this USB Physical 
Connector (physical port). 
Once disabled, any USB devices 

plug into connector will not be 
detected by BIOS or OS.

USB HS Physical Connector 

[Enabled]

USB HS Physical Connector

Enables or disables the USB Physical Connector (physical port). Once 
disabled, any USB devices plugged into the connector will not be detected 
by BIOS or OS.

Summary of Contents for DFA1163




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands