manualshive.com logo in svg

Nexcom DFA1163, User Manual

Share
Download
Nexcom DFA1163 User Manual Download Page 19

Copyright © 2021 NEXCOM International Co., Ltd. All Rights Reserved.

3

DFA1163 User Manual 

Chapter 1: Product Introduction

Knowing Your DFA1163

Front Panel

Reset Button

USB 3.0

SIM Slot

PWR/PoE0/PoE1/PoE2/5G LTE/

WLAN/SSD/MGMT LED Indicators

Ethernet LED Indicators

Reset Button

Press to restart the system.

USB 3.0 Ports

Used to connect USB 3.0/2.0 devices.

SIM Slot

Used to insert a SIM card.

Ethernet LED Indicators

Displays Ethernet activity
Link activity: Green for link; Flashing green for activity. 
GbE speed: Green for 1G; Amber for 100M; Off for 10M
2.5GbE: Green for 2.5G; Amber for 1G; Off for 100M/10M
SFP: Green for 1G; Off for others
SFP+: Green for 10G; Off for others

LED Indicators (PWR/PoE0/PoE1/PoE2/5G LTE/WLAN/SSD/MGMT)

Power LED: Green for on; Red for off
PoE0~2: Green for active; Off for inactive
5G LTE: Green for module installation; Off for module non-installation
WLAN: Green for module installation; Off for module non-installation
SSD: Green for active; Flashing green for data transferring; Off for inactive
MGMT: Green for active; Off for inactive

Summary of Contents for DFA1163




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands