Nexaria NEX-SH-B109 Instructlon Manual Download Page 2

Copyright

 

The content of this publication may not be reproduced in any part or as a whole, stored, 
transcribed in an information retrieval system, translated into any language, or 
transmitted in any form or by any means, mechanical, magnetic, electronic, optical, 
photocopying, manual, or otherwise, without prior written permission. 
 

Trademarks

 

All products, company, brand names are trademarks or registered trademarks of their 
respective companies.  
 

FCC Interference Statement FCC ID: YAZ-NEX09 

This device complies with part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) This device may not cause harmful interference, and (2) this device 
must accept any interference received, including interference that may cause undesired 
operation.  
 

IC: 7839B-NEX09 

Complies with Canada RSS-210  
 

CE Declaration of Conformity

 

This equipment complies with the requirements relating to electromagnetic compatibility, 
EN 55022/A1 Class B. Conformity  
 

Warning  

They are used for identification purposes only. Specifications are subject to be changed without 
prior notice. This equipment has been tested and found to comply with the limits for a class B 
digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide to 
provide reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the installation. , May cause harmful interference to radio communication. 
However, there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:  

-Reorient or relocate the receiving antenna  
-Increase the separation between the equipment and receiver  
-Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected 
-Consult the dealer or an experienced radio / TV technician for help 

You are cautioned that changes or modifications not expressly approved by the party responsible 

              for compliance could void your authority to operate the equipment. 

 

 You are cautioned that changes or modifications not expressly approved by the party responsible

 

or compliance could void 

 

your authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other 

 

antenna or transmitter. Industry Canada - Class B This digital apparatus does not exceed the Class B limits for radio noise

 emission for digital apparatus as set out in the interference-causing equipment standard entitled "Digital 
Apparatus," ICES-003 of industry Canada.

 

FCC RF radiation exposure statement:his transmitter must not be co-located or operating in conjunction with any other antenna or 

 transmitter.
This Class B digital apparatus complies with Canada RSS-210.Cet appareil num?rique de la classe B est conforme  a' la norme 
CNR-210 du CanadaThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. 
This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. 
                  
t

 

Summary of Contents for NEX-SH-B109
















Reviews: