Basics
Admin Password
You can change the router’s administrative password. (default = admin)
Wi-Fi Settings
Here you can change whether the Wi-Fi is enabled, the channel on which the Wi-Fi is broadcast on, the
name that is broadcast, the wireless mode, the encryption type, the key (password) to access the broadcasted
Wi-Fi signal, and enable Wireless Distribution System (WDS).
• Disable only if you do not want anyone accessing the router wirelessly.
• Change channel if other wireless devices are interfering with the router.
• Change the router’s Wireless Mode. Choose from six settings, b, g, or n and mixes.
• Routing mode is factory set to Provide (Access Point).
• Choose to hide the ESSID.
• Change the Network Name (ESSID) to whatever name you wish to be broadcasted.
• Change security and encryption type as necessary. Some wireless devices cannot connect to all
security modes.
• Change Key (password). We suggest that this setting be changed.
• Choose to enable MAC Address filtering, then select filter policy and create the address list.
NOTE: After any changes, select ”Save”
to retain. System will refresh following,
“Save”.
WDS: Wireless Distribution System
(WDS) is a feature that allows multiple
access points of the same physical radio
type to be bridged together as one common
WiFi network. Because the same physical
radio type must be used, this feature only
operates with other Nexaira routers. The
following configuration options are avail
-
able:
• BSSID: Your router supports up to
four WDS clients. Enter the BSSID
(MAC address listed on the bottom
label of the router, also listed under
LAN on the Wired Interfaces page) of
the other devices to be connected to
via WDS.
