Wired Interfaces
Here you can review WAN, and LAN status as well as change Local Network, and WAN Ethernet settings.
• The IP address is the address of the router. It is also your local network’s gateway address which is
used by all LAN hosts to access the Internet through the WAN connection.
• The Netmask is used to determine the number of subnetworks that can be connected to the router.
• The IP Gateway (optional) field is and advanced an optional setting that is available if your local
network has a gateway that is different than the router’s LAN IP address.
• DNS Server (optional) allows you to specify a DNS server for LAN hosts to use if your WAN
connection does not supply a valid server address, or if not-peer DNS Server information is required or
chosen under Cellular Datacard settings.
• Change WAN port into a second LAN port.
• Enable IP Passthrough mode to have one client have the WAN IP. All router functions are disabled.
• Enable or disable the router’s ability to connect to the internet through a WAN Ethernet connection.
NOTE: After any changes, select ”Save” to retain. System will refresh following, “Save”.
