5
EN
Safety
Installation
Wire colors may vary per country. Contact an
electrician when in doubt about wiring. The module
contains 2 voltage-free switches. This makes
it possible to switch low-voltage motors. Never
connect 230 VAC wires to low-voltage wires, as it
can result in defects, a short circuit or fire.
Maximum load
Never connect lights or equipment that exceed the
maximum load of the receiver, as it can result in
defects, a short circuit or fire.
Shock hazard
Exercise caution when installing a receiver. Voltage
may be present, even when a receiver is switched
off.
Life-support
Never use Nexa products for life-support systems or
other applications in which equipment malfunctions
can have life-threatening consequences.
Interference
All wireless devices may be subject to interference,
which could affect performance. The minimum
distance between 2 receivers should be at least
50 cm.
Repairing
Do not attempt to repair this product. There are no
user-serviceable parts inside.
Water-resistance
This product is not water-resistant. Keep it dry.
Moisture will corrode the inner electronics and can
result in a short circuit, defects and shock hazard.
Cleaning
Use a dry cloth to clean this product. Do not use
harsh chemicals, cleaning solvents, or strong
detergents.
Handling
Do not drop, knock, or shake the device. Rough
handling can break internal circuit boards and fine
mechanics.
Environment
Do not expose the product to excessive heat
or cold, as it can damage or shorten the life of
electronic circuit boards.
