Nex1 EZDigiMagic DM220, User Manual, Page: 11 / 17

10
4.Important Notes
Please read the following notes prior to use in order to prevent damage to your
EZDigiMagic.
(1) This product will make a backup copy of the data in the memory card but will not
alter or erase the data in the memory card while in the copy mode. (However, you
may use the digital camera or PC-link mode to delete or change the content of the
memory card.)
(2) This product uses Multi-Session recording format for copying multiple memory
cards onto the same disc. The disc can be read by any system that supports
ISO-9660 CD-ROM.
(3) If you use CD-R/W blank discs, the disc must be formatted to ISO format. If the
disc is UDF formatted, reformat the CD-R/W disc into ISO format before using as
the backup disc in your EZDigiMagic.
(3) This product uses data backup concept for recording data. For example, after the
first backup operation, a folder will be created with the name “01” which will contain
all data from the first memory card. The second backup operation will create a
new folder “02”, and so on for all subsequent backup operations until the disc is full.
(4) You must use a blank CD-R or CD-RW disc for the first backup. You may use any
CDs created by DM220 for further backup if the disc space is still available.
(5) You cannot use another CD burner to write data onto the CDs created by DM220;
or you will risk recording failure, damaging the data and the disc.
(6) During the CD burning operation, avoid any vibration or shock to the device as
damage may occur to the read/write head of the burner.
(7) Do not power off the unit during the copy operation or CD burning, damage will
occur to the back up disk.
(8) Some memory cards may have minor compatibility issues with DM220. If the
device is switched on with such memory card already inserted, DM220 may fail to
initialize correctly. In such case, remove the memory card, then power on the
device and re-insert the memory card.