Newtons4th PSM3750 NumetriQ, Startup Manual, Page: 7 / 104

PSM3750 Quick User Guide
Page 5
2. Safety
2.1 IMPORTANT SAFETY INSTRUCTIONS
This equipment is designed to comply with BSEN 61010-1 (Safety requirements
for electrical equipment for measurement, control, and laboratory use)
– observe
the following precautions:
 Ensure that the supply voltage agrees with the rating of the instrument
printed on the back panel
before connecting the mains cord to the supply.
 This appliance must be earthed. Ensure that the instrument is powered from
a properly grounded supply.
 The inputs and outputs must not be connected to common mode signals
greater than 500V peak.
 The inputs must not be connected to signals greater than 500V peak.
 Keep the ventilation holes on the underneath and sides free from obstruction.
 Do not operate or store under conditions where condensation may occur or
where conducting debris may enter the case.
 There are no user serviceable parts inside the instrument – do not attempt to
open the instrument, refer service to the manufacturer or his appointed
agent.
Note: Newtons4th Ltd. shall not be liable for any consequential
damages, losses, costs or expenses arising from the use or misuse of
this product however caused.