PSM3750 Quick User Guide
Page 66
Conducting a sweep in LCR mode:
The PSM3750 is able to operate either in Real time mode at a single frequency
where the measurements are filtered and updated on the display; alternatively it
can sweep a range of frequencies and present the results as a table or graph.
Before performing a sweep, either series circuit or parallel circuit must be
selected from within the LCR mode as per the screenshot below.
The frequency points to be measured are specified with three parameters
1.
Number of Steps
2.
Start frequency
3.
End Frequency
All parameters are set within the “SWEEP” button
Summary of Contents for PSM3750 NumetriQ
Page 1: ...PSM3750 START UP GUIDE Firmware v1_27 23rd February 2016...
Page 2: ......