How to manage
User Manual forAZ710 Up Converter
version 1.2
10
SHAPING THE FUTURE OF SATELLITE COMMUNICATIONS
By default, the IP address of all Newtec devices is 10.0.0.1.
AZ710/Unit/Setup/Ethernet
Device IP address: 10.0.0.1
In this mode, click AZ710 on the left side of the screen to get an overview of all the
parameters in the device.
To change the parameters of the device, click
Log In
to
log into the device.
Log in with the user name and password that is defined in the web interface menu:
AZ710 >> Unit >> Setup >> Web interface menu
By default the login credentials
<root>
respectively.
Once logged in, there are three levels:
•
Read-only
: in this mode you can only see (read) the
parameters corresponding to the operator mode. You cannot
change them.
•
Operator
: this mode corresponds with the device Normal
mode. It enables the default set of parameters that are most
frequently used.
•
Administrator
: this mode corresponds with the device Expert
mode and gives you access to an additional set of more
advanced parameters.
You can now remotely view and change all the parameters of the device through
the GUI.
