FieldLiner 3™
ALWAYS wear safety goggles or protective eye-wear when operating the unit!
1700 Jasper St. Unit F, Aurora, CO 80011
T
800.624.6706
F
303.364.7796
•
Newstripe.com
FieldLiner 3™ Manual / 4867.0917
8.
Loosen the star knob on the right side of the
chassis riser. Set the tank assembly into the riser
with the outlet fitting in the bottom to the rear
(fitting fits in the slot of the chassis base). Secure
the tank by tightening the star knob on the right
side of the chassis riser (Pic 4).
9.
Feed the small end of the spray hose through the
grommet in the chassis riser and then connect it
to the outlet fitting in the bottom of the tank at
the back of the machine and lightly tighten with a
wrench (Pic 5).
10.
Coil the hose assembly, leaving enough hose to
connect to the spray gun and then secure the
hose to the inside of the handle with the
provided Velcro strap. Connect the hose to the
spray gun by hand (Pic 5).
Pic 3
Pic 5
Pic 4
Page 3 of 8
