OPS-A
Arc Lamp Power Supplies
Page 9
3.4 POWER SUPPLY CONNECTIONS
3.4.1. Front Panel Controls/Connections
Figure 1 OPS-A Power Supply Front Panel Connections.
A. USB
. The USB connector on the front panel is used to install firmware and LCD GUI updates to the
power supply. Any firmware updates, please visit OPS-A power supply product page.
B. Horizontal menu buttons.
These four horizontal menu buttons are for using setting and monitoring
various features of the power supply:
a. Lamp Operating Mode
b. Manual/Timed Shutter Control, Display Features
c. Saving/loading particular setups.
C. SHUTTER
. This button is for manual control of an electronic TTL input shutter. When pressed, the
shutter will open/close.
D. Vertical menu buttons.
These four vertical menu buttons are for navigating settings for each feature
associated with pressing the horizontal menu buttons of the power supply.
E. CLEAR
. The CLEAR button is for exiting the feature menu currently displayed on the LCD screen.
This button is also used to clear any error messages that are displayed.