OPS-A
Arc Lamp Power Supplies
Page 4
1.2 GENERAL WARNINGS
Read all warnings and operating instructions for this system prior to setup and use.
Do not use this equipment in or near water.
To prevent damage to the equipment, read the instructions in the equipment manual for proper
input voltage.
This equipment is grounded through the grounding conductor of the power cord.
Route the power cord and other cables so they are not likely to be damaged.
Disconnect power before cleaning the equipment.
Do not use liquid or aerosol cleaners; use only a dry lint-free cloth.
Lock out all electrical power sources before servicing the equipment.
To avoid explosion, do not operate this equipment in an explosive atmosphere.
Qualified service personnel should perform safety checks after any service.
If this equipment is used in a manner not specified in this manual, the protection provided by this
equipment may be impaired.
To prevent damage to equipment when replacing fuses, locate and correct the problem that
caused the fuse to blow before re-applying power.
Do not block ventilation openings.
Do not use or store flammable liquids near the power supply.
Do not position this product in such a manner that would make it difficult to disconnect the power
cord.
Use only the specified replacement lamp.
This product should only be powered as described in the manual.
Do not remove the cover for normal usage.