EDH0170FE1010 – 09/98
viii
LDS1000 Controller for Laser Diode Sensors
CAUTION: LASER SAFETY
LDS Series Sensors are CLASS II LASER INSTRUMENTS according to the
EN 60825-1 standard (July 94):
DO NOT LOOK INTO THE BEAM
Max. Power 0.9 mW @ 670 nm
WARNING: DANGEROUS VOLTAGE
This equipment operates with a supply voltage that can be fatal.
Do not introduce any object into the controller and do not spill any
liquid on the equipment as this could cause a short circuit.
Opening or removing the cover of the equipment exposes you to electric
shocks.
Do not open the equipment. The parts that are inside are of no use to the
user.
CAUTION: SAFETY REGULATIONS
Do not use the instrument in an explosive environment.
Make sure there is no liquid near the instrument.
Make sure that the instrument is not exposed to excessive humidity
(more than 85%).
Do not replace any part and do not modify the equipment in any way
Should the equipment require servicing or repairs send it back to our
head office.
WARNING: UNPLUGGING
Systematically disconnect the plug in all the following cases:
• If the power supply lead or any other cable is damaged or frayed.
• If the mains socket is damaged in any way.
• If the equipment has been exposed to rain, to excessive humidity or if
any liquid has been spilt on it.
• If the equipment has fallen or if the unit is damaged.
• If you think that the equipment requires servicing or repairing.
• When you clean the unit.
NEWPORT SHALL NOT BE HELD LIABLE IF THE ABOVE-MENTIONED
WARNINGS ARE NOT RESPECTED.
VISIBLE LASER RADIATION
WHEN OPENING
AVOID DANGEROUS DIRECT
EYE EXPOSURE TO BEAM
VISIBLE LASER RADIATION
AVOID DIRECT EYE EXPOSURE TO BEAM
CLASS 2 LASER PRODUCT
Max. Power = 0.9 mW at 670 nm
