Newport i16-AL, Operator'S Manual

Page: 22 / 48

18
3.2.4.2 Input Type (RTD)
ENTER INPUT TYPE MENU:
Press
a
Press
d
Press
d
1) Press
a
, if necessary until
CNFG
prompt appears.
2) Display advances to
INPT
Input Menu.
3) Display flashes
T.ç
,
RTD
or
PROC
(Thermocouple, RTD or
Process). If the displayed input type is
RTD
, press
a
to skip to
step 6 (
RTD
stops flashing).
RTD SUBMENU:
Press
b
Press
d
Press
d
Press
b
Press
d
4) Scroll through the available selection to
RTD
(flashing).
5) Display shows
STRD
stored message momentarily and then
RTD
(not flashing).
6) Display flashes previous RTD type selection i.e.
392.2
(see below for RTD types selection).
7) Scroll through the available RTD types to the selection of
your choice.
8)
Display shows
STRD
stored message momentarily and then
advances to the
RTD
RTD value.
RTD Types: 392 385 Two, Three or Four wire
Display:
392.2
,
392.3
,
392.4
,
385.2
,
385.3
,
385.4
Last digit indicates: 2-, 3- or 4-wire input.
RTD VALUE SUBMENU:
Press
d
Press
b
Press
d
9) Display flashes previous RTD value selection i.e.
100_
(see below for RTD value selection).
10) Scroll through the available RTD values to the selection of
your choice.
11) Display shows
STRD
stored message momentarily and
then advances to
RDG
Reading Configuration Menu.
RTD Values: 100 OHM 500 OHM 1000 OHM
Display:
100_ 500_ 1000