ESP302 Controller
Start-Up Manual
11
A1270B1 - EDH0411En1021 – 02/20
3.4.1
Rack Mounting Kit
The ESP302 controller is basically intended to be installed on a flat surface such as a
table or a cabinet shelf.
A rack mounting kit can be provided separately to properly secure the controller in a
standard 19" electronic enclosure. It is composed of two brackets and handles that can
be easily attached on the sides of the controller. Both orientation mountings are possible
as shown below.
Figure 11: Front rack mounting.
2 HANDLES
2 BRACKETS
2 PANELS
2x 2 M3x6 SCREWS
2x 2 M5x8 SCREWS
2x 2 M4x8 SCREWS
