CONEX-LDS
Command Interface Manual
1.0
Introduction
1.1
Purpose
The purpose of this document is to provide the method syntax of each
command to communicate with the CONEX-LDS autocollimator
exposed
in assembly Newport.CONEXLDS.CommandInterface.dll. This .Net
assembly is designed and developed by Newport. This DLL is used by
CONEX-LDS applet to communicate with the CONEX-LDS
autocollimator.
1.2
Overview
Command Interface DLL is a generic name that refers to a DLL used to
communicate with an instrument. Typically this DLL exposes all the
commands the instrument supports. These commands are exposed as
function calls of the Command Interface DLL.
Newport.CONEXLDS.CommandInterface.dll is the assembly used for
communicating with the CONEX-LDS autocollimator. This assembly is
installed with the CONEX-LDS applet.
NOTES
Each function name is defined with the command code “AA”.
For more information on each command function, refer to the CONEX-LDS
programmer’s manual.
Electronic Autocollimator
CONEX-LDS
1
EDH0333En1022 — 12/18
