CONEX-LDS
Command Interface Manual
RG_Set
Syntax
int RG_Set(int controllerAddress, int Range, out string errstring)
controllerAddress: controllerAddress
Range: Range
errString: The failure reason
return: 0 in success and -1 on failure
Description
This function is used to process synchrounous RG Set command which is used to Set
the range value. Refer to the CONEX-LDS User’s Manual for more information on
this command
RS
Syntax
int RS(int controllerAddress, out string errstring)
controllerAddress: controllerAddress
errString: The failure reason
return: 0 in success and -1 on failure
Description
This function is used to process synchrounous RS Set command which is used to
Reset the controller. Refer to the CONEX-LDS User’s Manual for more information
on this command
RS485
Syntax
int RS485(int controllerAddress, out string errstring)
controllerAddress: controllerAddress
errString: The failure reason
return: 0 in success and -1 on failure
Description
This function is used to process synchrounous RS## Set command which is used to
Reset the controller’s address to 1. Refer to the CONEX-LDS User’s Manual for more
information on this command
11
EDH0333En1022 — 12/18
