INSTALLATIEHANDLEIDING – P5
VERSION 0129NM02INT01
INSTRUCTION MANUAL – P5 |
P5
07A0RNM20ENG05
Wall mounting
Installation materials
Installation &
configuration of
accessories
Required tools & additional materials
(not provided)
- 4x 6.3mm x 70mm Self Tapping pan
head Torx screws (DIN 7981C) stainless
steel (A4);
- 4x plugs;
- 4x Stainless steel (A4) washers;
- Drill and bit;
- Torx screwdrivers (T20);
- Voltage tester;
- Tape measure;
- Spirit level
- Power cable;
- Cable mount clips;
- RCD & MCB;
- For local configuration, a smartphone
with Installer App
- For EV- and ZE-Ready installation:
Cable 5 x Ø 1,5mm2 (minimum) for shunt
and ON/OFF peak accessories;
- Cable mount clips;
- UTP cable (CAT5 or CAT6);
- RJ45 UTP cable crimp tool;
- RJ45 connectors;
- Network cable tester;
- For Load Shedding functionality:
- RJ12 cable (straight) for Load Shedding
module connection;
- Free schuko socket in fuse box for power
supply of Load Shedding module;
- Shunt 3 options:
> ABB S2C-A2 in combination with S200
MCB or DS200 RCD
> Schneider IMX A9A26946 in
combination with ACTI9 RCD or MCB
> Legrand DX3 shunt trip (406278) in
combination with DX3 RCD or MCB
Package contents with charge point
- Charge point;
- Rubber grommets (various sizes);
- 2x Plastic spacers;
- 1x M4 x 16 mm bolt (Torx);
- 6x M4 x 12 mm bolts (Torx);
- 2x Power cable clamps;
- 2x UTP data cable inlet with rubber seal
- Load Shedding module for Load
Shedding functionality;
- P1 dongle for Load Shedding
functionality (black);
- QR code for WiFi connection
3. PRODUCT OVERVIEW
3.1 MOUNTING, PACKAGE CONTENTS AND REQUIRED TOOLS
