NewMar Dutch Star 2011, Owner'S Manual

Page: 29 / 78

3:8 2011
Dutch Star Diesel Pusher
by Newmar
The following warning label has been placed in the cooking area to remind the user to provide an adequate supply
of fresh air for combustion:
WARNING
It is not safe to use cooking appliances for comfort heating. Cooking appliances need fresh air for safe
operation. Before operation:
1. Open overhead vent or turn on an exhaust fan.
2. Open a window.
Unlike homes, the amount of oxygen supply is limited due to the size of the recreational vehicle. Proper
ventilation when using the cooking appliance(s) will avoid dangers of asphyxiation. It is especially important
that cooking appliances not be used for comfort heating as the danger of asphyxiation is greater when the
appliance is used for long periods of time.
The following label has been placed in the vehicle near the range area:
If You Smell Gas:
1. Extinguish any open flames, pilot lights, and all smoking materials.
2. Do not touch electrical switches.
3. Shut off the gas supply at the tank valve(s) or gas supply connection.
4. Open doors and other ventilating openings.
5. Leave the area until the odor clears.
6. Have the gas system checked and leakage source corrected before using again.
Television Antenna
A TV antenna with a power booster is installed in your coach and is designed for reception of all color and black-
and-white channels. If the reception is poor, you should verify that the
power switch is in the “ON” position and that all of the connectors are
tight. If poor reception still occurs, consult your authorized dealer.
To raise the antenna into the operating position, turn the elevating crank
(clockwise) in the “UP” direction, about 13 turns, or until some resistance
to turning is noticed. On the power booster, turn the switch to “ON” in
order to amplify the signal being received. Once in the “UP” position,
rotate the antenna to receive the best picture. This is done by pulling
down on the directional handle with both hands until it disengages from
the ceiling plate and then rotating it until reception has improved. The
antenna must be lowered before moving the vehicle. To lower, rotate the
directional handle until the pointer is aligned with the pointer on the
ceiling plate. Turn the elevating crank (counter-clockwise) in the
“DOWN” direction, about 13 turns, or until some resistance to turning is noticed. The antenna is now locked and
in the travel position. Your unit may be equipped with one exterior antenna jack and two interior antenna jacks.
CAUTION
Under no circumstances should you lower the antenna in any position except the travel position.