Page 7
Raymor Showers / Pivot Door Set
ALLOW 24 HOURS FOR
SILICONE TO DRY BEFORE
USE
A
B
STEP 3
1. Slide Door assembly and Return panel into the wall channels. (1)
2. Bring together the two panel assemblies together at the corner (2).
3. Adjust the Door and Return Panels evenly on the tray and into the Wall channels (1).
4. Bring the corner joint together and drill and fasten this point (2).
5. Align the door frame and return panel evenly to the walls and Tray.
6. Square up the door frame.
7. Fit door inserting top rollers into top rail and push down bottom rollers into bottom rail.
8. Make final alignment adjustments to the Shower with a spirit level and fasten frame to
Wall channels
STEP 4
1. Fasten the handle in place (A).
2. Apply silicone to the outer boundaries as indicated with dotted lines (B).
Note: Sealing on the inside of the shower will void the warranty.
