Software
24
Manual DMT-TFT.110
Badge enable mask 1
The function activates
Enable mask 1
for floors. In this mode, a mask containing the floor enables and
locks is set for the terminal. The function can be assigned to a prog. input or a button.
Disabled persons mode Destino
This function activates the disabled persons mode (
Destino
) for the next destination call
.
The function can be assigned to a prog. input or a button. Destination entry is additionally required
following activation of this function. The call causes a special destination control function to be
triggered which takes a lift out of the group and assigns it to the passenger. The lift brings the
passenger directly to the desired floor.
5.5
Destino SAM
The
DMT-TFT.110
terminal has the
Destino SAM
speech output module.
When a destination call is made, it is acknowledged with an acknowledgement message and a SAM
message from the GST.
By default, speech output is active only if the GST special calls
5 Disabled
and
6 DTarget
are
used. If permanent speech output is required, the configuration of the GST must be adapted.
5.6
Designs
5.6.1 Standard design
The following example shows how a destination call is processed in 3 stages:
1. Idle state
The screen shows the prompt to enter a floor.
1
2
3
Please select floor
1
Prompt
2
Logo
3
Keypad enable
Summary of Contents for EAZ DMT-TFT.110
Page 1: ...Destination call terminal MANUAL DMT TFT 110...
Page 46: ...NOTES...
Page 47: ...NOTES...
