Newland NLS-NFT10, User Manual

Page: 15 / 69

9
Chapter 3 Basics
Introduction
This chapter provides the basics of setting and using the NFT10
Switching On/Rebooting/Switching Off the NFT10
After being installed with the SIM card and fully charged, you can start to use the NFT10.
Switch the NFT10 on: Hold down the Power key on the right side of the terminal until the Android logo is displayed. Note
that the initialization is going to take some time before the NFT10 displays the Home screen.
Reboot the NFT10: Hold down the Power key on the right side of the terminal until the window below pops up, then tap
“Restart”.
Switch the NFT10 off: Hold down the Power key on the right side of the terminal until the window below pops up, then tap
“Power off”.