Newland NLS-NFT10, User Manual

Page: 11 / 69

5
Charging the Battery
Connect the NFT10
to a power outlet using the included AC adapter or USB cable. When the terminal’s battery is less than
5%, it takes about 3 hours to fully charge it (The terminal is shut down or in sleep mode).
When charging the NFT10 with an AC adapter or USB cable, the user is notified of the charging status by the LEDs on the
terminal.
LEDs on the NFT10
Green LED on Fully charged
Red LED on Charging in progress
Red LED flashes constantly Low-battery alert
Blue LED flashes once Good read
Note: If the NFT10 battery is completely drained, please press the power key to turn it on after 15 minutes of being
charged.
LED