nlscan.com
Page 17
General Programming
General Programming
Tools
Code Programming ON
Code Programming OFF
Reading Mode
Sensor Mode
After programming, the scanner will start to sense the environment without trigger.
After a scan, it will stop and keep sensing to wait another illumination changing. In
sensor mode, a trigger also can start a scan. The sensitivity level could be chosen.
Sensor Mode
【
Pro CMD
：
99900113
】
In sensor mode, the scanner could set Reading a barcode time length, and set interval length as sensing
stabilization time.
Reading a barcode time length: 01-15, corresponding to 1s, 2s, ..., 15s in 1s increments; 00: in
fi
nite.
Interval length: 01-15, corresponding to 0.5s, 1s, 1.5s, ..., 7.5s in 0.5s increments.
Reading a barcode time length
【
Pro CMD
：
99900150
】
Interval Length
【
Pro CMD
：
99900151
】
High Sensitivity
【
Pro CMD
：
99900152
】
Medium Sensitivity
【
Pro CMD
：
99900153
】
Low Sensitivity
【
Pro CMD
：
99900154
】
User Sensitivity
【
Pro CMD
：
99900161
】
Sensitivity is used to evaluate the scanner’s ability to sense the changing environment. Users can choose a
sensitivity level which suits the environment.
Sensitivity Level Programming
There are sixteen levels of 0 to F. The lower the value is, the higher the sensitivity level is.
For instance, we could set sensitivity level to 5 level.
Read
“
Code Programming ON
”
1
、
Read
“
2
、
User Sensitivity
”
Read number
“
5
”
3
、
Read
“
4
、
Code Programming OFF
”
