Newland NLS-FM100-M-00 Integration Manual Download Page 12

Page: 12 / 130

nlscan.com

Page 4

Getting to Start

Unpacking

Unpack FM100 and accessories. Check with the packing list. Make sure that there is no damage or missing

part(s). If any damage or missing parts, please keep the original package and contact your supplier for

services.

Outline of FM100

The

ﬁ

gure below shows major components of FM100.

FM100 Outline

Note:

The scan window must be kept clean. Improper maintenance will breach the limited warranty.

Avoid rough objects not to damage or scratch the window.

Use brush to remove the stain.

Use soft cloth (cloth for glasses) to clean.

Prohibit spraying towards the window.

Only use clean water as a cleanser.

Indicator

Aiming Light

Lens

Summary of Contents for NLS-FM100-M-00



































































































































Search results

Summary of Contents for NLS-FM100-M-00

Reviews:

Related manuals for NLS-FM100-M-00

Brands by name

Popular brands

Newland NLS-FM100-M-00, Integration Manual

Search results

Summary of Contents for NLS-FM100-M-00

Reviews:

Related manuals for NLS-FM100-M-00

Brands by name

Popular brands