Newland HR22 Dorada User Manual Download Page 2 | Manualshive

Page: 2 / 175

background image

Disclaimer

© 2016 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved.

Please read through the manual carefully before using the product and operate it according to the manual. It is
advised that you should keep this manual for future reference.

Do not disassemble the device or remove the seal label from the device, doing so will void the product
warranty provided by Fujian Newland Auto-ID Tech. Co., Ltd.

All pictures in this manual are for reference only and actual product may differ. Regarding to the product
modification and update, Fujian Newland Auto-ID Tech. Co., Ltd. reserves the right to make changes to any
software or hardware to improve reliability, function, or design at any time without notice. The information
contained herein is subject to change without prior notice.

The products depicted in this manual may include software copyrighted by Fujian Newland Auto-ID Tech. Co.,
Ltd or third party. The user, corporation or individual, shall not duplicate, in whole or in part, distribute, modify,
decompile, disassemble, decode, reverse engineer, rent, transfer or sublicense such software without prior
written consent from the copyright holders.

This manual is copyrighted. No part of this publication may be reproduced, distributed or used in any form
without written permission from Newland.

Fujian Newland Auto-ID Tech. Co., Ltd. reserves the right to make final interpretation of the statement above.

Fujian Newland Auto-ID Tech. Co., Ltd.
3F, Building A, No.1, Rujiang West Rd., Mawei, Fuzhou, Fujian, China 350015

http://www.nlscan.com

«
1
2
3
4
...
»

Summary of Contents for HR22 Dorada
















































































































































































Reviews:

No comments

Related manuals for HR22 Dorada

Brand: Ortus Pages: 11

Tire and Rubber

Brand: Metrologic Pages: 1

Brand: Chase Pages: 8

Brand: Cognex Pages: 29

Brand: KoamTac Pages: 7

FEITIAN R301-C11

Brand: CDG Pages: 7

Brand: ArgoxScan Pages: 110

Brand: Unitech Pages: 169

Brand: Bplus Technology Pages: 3

Brand: Intratone Pages: 2

Brand: Intratone Pages: 4

Brand: XTIOT Pages: 4

Brand: Diablotek Pages: 1

Brand: Opticon Pages: 40

Brand: Sigur Pages: 52

Brand: i-tec Pages: 20

Brand: Icidu Pages: 7

Brand: IDTECK Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands